Table top furnace
Industrial ovens & furnaces
| Next Steps |
|
|
 |
|
HIGH PERFORMANCE EQUIPMENT
Pyradia's tabletop furnaces integrate quality components and superior workmanship, for maximum
performance in a variety of industrial or laboratory applications, at temperatures as high as 2,300oF (1,260oC).
INDUSTRIAL CONSTRUCTION
Heavy duty construction Our rugged furnace design incorporates quality hardware to a heavy gauge casing, for
increased durability in all type of processes.
QUALITY INSULATION
The highest quality low-density refractory bricks used in the construction of its chamber assure maximum insulation while minimizing heating or cooling cycles.
BUILT TO LAST
The specially designed grooved bricks optimize heat transfer and fully support the FeCrAl heating elements for maximum life expectancy.

SUPERIOR HEATING DISTRIBUTION
A special attention is given to the distribution of the heating elements to assure optimal temperature uniformity throughout the furnace.
ACCURATE TEMPERATURE CONTROL
Pyradia tabletop furnaces are equipped with state of the art ramp to set point digital microprocessor temperature controller.
GREATER VERSATILITY
A wide choice of options gives our units the flexibility to suit a variety of commercial, industrial and laboratory heat treating applications.

CHARACTERISTICS:
- Choice of
enamel coated 16 gauge steel or (304) stainless steel
- Heavily hinged door
with a 180o opening
- Insulation of 4 1/2” pre-grooved refractory bricks
(with the exception of the F50, which is 2 1/2”)
- Microprocessor temperature controller,
with auto tuning PID parameter offering ramp/soak program capability
- Low watt density FeCrAl heating elements
- The furnace comes standard with a cordiorite hearth plate.
OPTIONS:
- Counterbalanced guillotine lifting
door with "Zero weight positioning"
- Heavy-duty furnace stand
- Special heating elements used in
corrosive environment
- Programmable controller of 2 programs with 8 segments
ramp/soak
- Solid State Relay for increase temperature accuracy
and silent operation
- Slide gate located on top of furnace
to vent corrosive vapors, also comes with a peephole in door
- High limit controller to automatically shutdown heating elements
when maximum temperature is exceeded
- Door safety switch to automatically shut off heating elements when
door is opened
- 208-240V/3 Ph available for the F300/F400 models
- Heating ellements in door to offer greater heat distribution
PROPOSED STANDARD MODELS:
| |
Inside dimensions |
Outside dimensions |
|
| Models |
L
(in) |
P
(in) |
H
(in) |
L
(in) |
P
(in) |
H
(in) |
(lbs) |
|
F50 /F50HP * |
6.5 |
6.5 |
4.5 |
12.0 |
18.0 |
17.5 |
35 |
|
F100/F100HP |
10.0 |
11.5 |
10.0 |
20.0 |
29.0 |
29.0 |
180 |
|
F200/ F200HP |
13.5 |
16.0 |
12.5 |
23.5 |
34.0 |
31.0 |
325 |
|
F300 /F300HP |
18.0 |
20.5 |
15.0 |
27.5 |
38.0 |
34.0 |
475 |
| F400HP |
13.5 |
29.5 |
15.0 |
23.5 |
46.0 |
34.0 |
1000 |
|
* Standard models shown here, other sizes available on request.
* PYRADIA improves its products continuously and may change the specifications without notice.
|
TEMPERATURE SPECIFICATIONS:
| STANDARD POWER MAX. TEMPERATURE |
| Models |
Continuous |
Intermittent |
Voltage |
kW |
| F50 |
1,800°F-1,000°C |
2,000°F-1,100°C |
120/1/60 |
0.8 |
| F100 |
1,800°F-1,000°C |
1,800°F-1,000°C |
120/1/60 |
1.5 |
|
F200 |
2,000°F-1,100°C |
2,300°F-1,260°C |
240/1/60 |
3.3 |
|
F300 |
2,000°F-1,100°C |
2,300°F-1,260°C |
240/1/60 |
6.0 |
|
F400 |
N/A |
N/A |
N/A |
N/A |
|
| HIGH POWER MAX. TEMPERATURE |
| Models |
Continuous |
Intermittent |
Voltage |
kW |
| F50HP* |
1,800°F-1,000°C |
2,000°F-1,100°C |
115/1/60 |
1.6 |
| F100HP |
2,000°F-1,100°C |
2,300°F-1,260°C |
240/1/60 |
3.0 |
|
F200HP |
2,000°F-1,100°C |
2,300°F-1,260°C |
240/1/60 |
5.0 |
|
F300HP |
2,000°F-1,100°C |
2,300°F-1,260°C |
240/1/60 |
10.0 |
|
F400HP |
2,000°F-1,100°C |
2,300°F-1,260°C |
240/1/60 |
15.0 |
|